C. It shall be unlawful for any person to remove, alter, deface, destroy, conceal, or otherwise obscure the manufacturer's serial number or marks, including personalty marked with a social security number preceded by the letters "VA," from such personal property or any part thereof, without the consent of the owner, with intent to render it or other property unidentifiable.
D. It shall be unlawful for any person to possess such personal property or any part thereof, without the consent of the owner, knowing that the manufacturer's serial number or any other distinguishing identification number or mark, including personalty marked with a social security number preceded by the letters "VA," has been removed, altered, defaced, destroyed, concealed, or otherwise obscured with the intent to violate the provisions of this section.
"Equipment or materials used to manufacture an unlawful electronic communication device" means (i) a scanner capable of intercepting the electronic serial number or mobile identification number of a cellular or other wireless telephone; (ii) electronic software or hardware capable of altering or changing the factory-installed electronic serial number of a cellular or other wireless telephone or a computer containing such software; (iii) a list of cellular or other wireless telephone electronic serial numbers with their associated mobile identification numbers; or (iv) a part, accessory or component of an unlawful electronic communications device possessed or used in the manufacture of such device including any electronic serial number, computer software, mobile identification number, service access card, account number, or personal identification number used to acquire, receive, use, decrypt or transmit an electronic communication service without the actual consent or knowledge of the electronic communication service provider.
Any person, firm, association or corporation who or which intentionally removes, defaces, alters, changes, destroys or obliterates in any manner or way or who causes to be removed, defaced, altered, changed, destroyed or obliterated in any manner or way any trademark, distinguishment or identification number, serial number or mark on or from any article or device, in order to secrete its identification with intent to defraud, shall be guilty of a Class 1 misdemeanor.
It shall be unlawful for any person, firm, association, or corporation regularly engaged in the business of repairing, selling, renting or leasing of business machines to fail to report any business machine which such person, firm, association, or corporation knows has an altered or removed identification or serial number. The report shall be made to the appropriate law-enforcement agency for the county, city, or town where such business machine is located.
No person, firm, association or corporation, either individually or in association with one or more other persons, firms, associations or corporations shall remove, change or alter the serial number or other identification number stamped upon, cut into or attached as a permanent part of any household or electrical or electronic appliance where such number was stamped upon, cut into or attached to such appliance by the manufacturer thereof.
No person, firm, association or corporation shall knowingly have in his or its possession for the purpose of resale or keep in his possession for a period in excess of forty-eight hours without reporting such possession to the appropriate law-enforcement agency in his county, town or city a household or electrical or electronic appliance, with knowledge that the serial number or other identification number has been removed, changed or altered.
Every manufacturer or dealer shall keep a register of all machine guns manufactured or handled by him. This register shall show the model and serial number, date of manufacture, sale, loan, gift, delivery or receipt of every machine gun, the name, address, and occupation of the person to whom the machine gun was sold, loaned, given or delivered, or from whom it was received. Upon demand every manufacturer or dealer shall permit any marshal, sheriff or police officer to inspect his entire stock of machine guns, parts, and supplies therefor, and shall produce the register, herein required, for inspection. A violation of any provisions of this section shall be punishable as a Class 3 misdemeanor.
Every machine gun in this Commonwealth shall be registered with the Department of State Police within twenty-four hours after its acquisition or, in the case of semi-automatic weapons which are converted, modified or otherwise altered to become machine guns, within twenty-four hours of the conversion, modification or alteration. Blanks for registration shall be prepared by the Superintendent of State Police, and furnished upon application. To comply with this section the application as filed shall be notarized and shall show the model and serial number of the gun, the name, address and occupation of the person in possession, and from whom and the purpose for which, the gun was acquired or altered. The Superintendent of State Police shall upon registration required in this section forthwith furnish the registrant with a certificate of registration, which shall be valid as long as the registrant remains the same. Certificates of registration shall be retained by the registrant and produced by him upon demand by any peace officer. Failure to keep or produce such certificate for inspection shall be a Class 3 misdemeanor, and any peace officer, may without warrant, seize the machine gun and apply for its confiscation as provided in § 18.2-296. Upon transferring a registered machine gun, the transferor shall forthwith notify the Superintendent in writing, setting forth the date of transfer and name and address of the transferee. Failure to give the required notification shall constitute a Class 3 misdemeanor. Registration data shall not be subject to inspection by the public.
Every manufacturer or dealer shall keep a register of all "sawed-off" shotguns and "sawed-off" rifles manufactured or handled by him. This register shall show the model and serial number, date of manufacture, sale, loan, gift, delivery or receipt of every "sawed-off" shotgun and "sawed-off" rifle, the name, address, and occupation of the person to whom the "sawed-off" shotgun or "sawed-off" rifle was sold, loaned, given or delivered, or from whom it was received. Upon demand every manufacturer or dealer shall permit any marshal, sheriff or police officer to inspect his entire stock of "sawed-off" shotguns and "sawed-off" rifles, and "sawed-off" shotgun or "sawed-off" rifle barrels, and shall produce the register, herein required, for inspection. A violation of any provision of this section shall be punishable as a Class 3 misdemeanor.
E. A law-enforcement agency that takes into custody a firearm surrendered to such agency pursuant to subsection C by a person who is subject to a protective order pursuant to § 16.1-279.1 or 19.2-152.10 shall prepare a written receipt containing the name of the person who surrendered the firearm and the manufacturer, model, and serial number of the firearm and provide a copy to such person. Any firearm surrendered to and held by a law-enforcement agency pursuant to subsection C shall be returned by such agency to the person who surrendered the firearm upon the expiration or dissolution of the protective order entered pursuant to § 16.1-279.1 or 19.2-152.10. Such agency shall return the firearm within five days of receiving a written request for the return of the firearm by the person who surrendered the firearm and a copy of the receipt provided to such person by the agency. Prior to returning the firearm to such person, the law-enforcement agency holding the firearm shall confirm that such person is no longer subject to a protective order issued pursuant to § 16.1-279.1 or 19.2-152.10 and is not otherwise prohibited by law from possessing a firearm. A firearm surrendered to a law-enforcement agency pursuant to subsection C may be disposed of in accordance with the provisions of § 15.2-1721 if (i) the person from whom the firearm was seized provides written authorization for such disposal to the agency or (ii) the firearm remains in the possession of the agency more than 120 days after such person is no longer subject to a protective order issued pursuant to § 16.1-279.1 or 19.2-152.10 and such person has not submitted a request in writing for the return of the firearm.
SET-XP is an epoxy-based high-strength anchoring adhesive. SET-XP is a 1:1 ratio, two-component anchoring adhesive for anchoring and doweling into concrete (cracked and uncracked) and masonry (uncracked) applications.
Anchoring adhesive shall be a two-component high-solids, epoxy-based system supplied in manufacturer's standard cartridge and dispensed through a static mixing nozzle supplied by the manufacturer. The adhesive anchor shall have been tested and qualified for performance in cracked and uncracked concrete per ICC-ES AC308. Adhesive shall be SET-XP adhesive from Simpson Strong-Tie, Pleasanton, CA. Anchors shall be installed per Simpson Strong-Tie instructions for SET-XP epoxy adhesive.
All serial numbers start with digits 20, while the third digit indicates Corps Area or Service Command (i.e. the area of Induction). The War Department allotted following blocks to members of National Guard units inducted into Federal Service.
All serial numbers start with digit 3, followed by the second digit indicating Corps Area or Service Command. The War Department allotted following blocks for Trainees or Draftees inducted under the Selective Training and Service Act of 1940:
GSW serial numbers contain a lot of information, including when the heater was manufactured. This can be determined by looking at the first four numbers, ignoring any letter that may start the serial number. The first two numbers represent the year the heater was built. If your heater was built before 2008, the next two numbers represent the month. If your heater was built after 2008, the next two numbers represent the week. 2b1af7f3a8